Steles

Stele in Anthrazit lackiert, mit Schaukasten, Klingel und Briefkasten

Stele aus gebürstetem Edelstahl mit Gravur und Blindenschrift

Stele aus gebürstetem Edelstahl mit Gravur und zwei Briefeinwürfen.

Stele aus Edelstahl mit zwei Briefeinwürfen und Funktionskasten

Stele aus Edelstahl mit Gravur, Briefeinwurf und Klingeln

Function and Design do not have to be Mutually Exclusive in the design of the entrance area. With our elegant stelae and communication pillars, we combine design with maximum functionality. The Design and Equipment adapts to the Structural conditions, the needs of the Building owners and the ideas of the Architects.

Communication Elements of all kinds can be Integrated – bell and light buttons, name badges, illuminated Displays, Intercom Systems, camera modules etc. Our steles also offer the Possibility for Blind people to Integrate Legible letters or Letter Boxes and Communication Elements in a Wheelchair-friendly way.

Jetzt die eigene Briefkastenanlage konfigurieren Anlage konfigurieren

Maximum External Dimensions

Maximum Height 2.000 mm

Maximum Depth: 270 mm

Maximum scope: 1.250 mm

Maximum Breite: (1.250 mm – (2 x Tiefe))/2

Material

Outer skin 1.5 mm Stainless Steel, Brushed

Mailbox

Mailbox with Front or rear removal

Door Equipped with a High-Quality pin Cylinder Lock

Case-dampened, Noiseless Closing flap, Flush, inward Opening

Attachment

for Screwing or Concreting

Material

Outer skin 1.5 mm Stainless Steel, Painted in Color

Equipment
Bell and Light button at the Customer’s choice

Other Functional Elements such as video camera, preparation for intercom,
key switch u. at the Customer’s discretion, Labeling

Direct Labeling of used labeling or functional fields by means of engraving, illuminated through-engraving or adhesive Labeling

Indirect labeling using an illuminated display and / or attached signs

Indirect Lighting

Pre-wired LE D light bar in 15 x 15 mm profile including constant Current Source
Twilight Switch for Indirect Lighting

We offer you powder coating free of charge in 21 standard RAL colors. Alternatively, we can paint all colors from the RAL Classic range for an additional charge.

Smooth, Silky Gloss

Smooth, matt

Feinstruktur, matt

Anthracite Gray

RAL 7016 Anthracite Gray

RAL 9006 White Aluminum

RAL 9007 Gray Aluminum

RAL 9016 Traffic White

DB703 Iron Glimmer

RAL 7035 Light Gray

RAL 8028 Terra Braun

RAL 8017 Chocolate Brown

RAL 6005 Moss Green

RAL 9005 Deep Black

RAL 9010 Pure White

In powder coating, the parts are manually painted after the pretreatment at KNOBLOCH. Here, electrostatically charged polyester powder is applied to the raw parts in a thickness of 70–100 micrometers using a hand spray gun and then baked at 160–200 ° Celsius. A continuous, weatherproof, thermostable surface is created.

No use of harmful solvents, the possibility of recovering and recycling the powder, efficiencies up to over 99% and short color change times in connection with high-precision control technology make this surface treatment the most economical and environmentally friendly of all surface technology.

At KNOBLOCH, polyester powder coatings are used in the quality of silk gloss with a gloss level of 75 ° +/- 10 °. Colors from the RAL range are used as standard. Colors of other standards such as British Standard (BS) or Natural Color System (NCS) or effect colors such as textured paints, pearl effect colors and the like. can also be easily painted, usually at an additional cost.

In order to achieve absolute color uniformity with the components available on site, the color available on site must be used, since there may be deviations in different batches from the same supplier. Here the customer usually the color powder or provides KNOBLOCH with a color sample for on-site comparison.

C0/EV1 Silver/Natural (Standard Color)

C31 Stainless Steel Colored

C32 Light Bronze

C33 Middle Bronze

C34 Dark Bronze

C35 Black

EV2 New Silver

EV3 Brass Colored

Anodized surfaces offer protection against mechanical influences and are weather and corrosion resistant. The metallic luster of the material is retained because the oxide layer is transparent. In particular, mailbox systems, and here in particular door side systems, are often used with anodized surfaces in order to make them optically suitable for anodized facades and anodized entrance systems.

The EURAS standard is used to define the same color of the existing parts. For absolute color consistency, the customer must provide a sample. In principle, all desired colors can be achieved.

PVD COATING

The PVD coating is a special process when a brass-colored surface is desired in the area of the mailboxes and bell panels. Polished stainless steel parts are steamed in a vacuum chamber. Since original brass parts weather quickly and are very sensitive to vandalism with a paint protection layer, a PVD coating is an alternative, as it creates a very hard, resistant surface.

Otherwise, this process can be used to create many color shades from gold to brass, bronze, copper, silver, gray, anthracite to black or matt black. The process is very complex and therefore also very cost-intensive. However, it is convincing in terms of quality and is therefore offered by KNOBLOCH when inquiring about brass-colored articles.

1 Casing

Standard: 0,63 mm Galvanized Sheet Steel, Powder-Coated
Option: Brushed Stainless Steel, 1.4301 (V2A) or 1.4404 (V4A)

2 Flap

Standard: 2 mm Extruded Aluminum Profile, Powder-Coated

Option: 1 mm Stainless Steel, Brushed or 2 mm extruded Aluminum Profile, Anodized

Possible Slot Sizes: 230 x 35 mm; 265 x 35 mm; 325 x 35 mm

Special flaps, Optional:

- große Einwurfklappen: 63 mm hoch, ermöglicht Einwurf von dickem Postgut, verringerter
- Eingreifschutz, in Briefkästen ab einer Höhe von 220 mm (nur HP) bzw. 330 mm möglich
- nach innen öffnende Einwurfklappen
- keine Einwurfklappen

Flap lock, optional:

- Not visible from the outside
- Mounted behind the flap using a Self-adhesive Carrier plate
- Resists forces up to 62 N / cm²
- Retrofitting Possible

3 Type

Standard: 1,2 mm galvanized sheet steel, powder-coated
Option: - 1.2 mm stainless steel, brushed, 1.4301 (V2A) or 1.4404 (V4A) - 1.2 mm aluminum, powder-coated or anodized
Hinges: stainless steel with pressed brass pin, rustproof

In addition to stainless steel, aluminum and galvanized steel sheet with a small zinc flower are processed. Aluminum and sheet steel are always powder-coated or anodized for aluminum. Pretreatment is always preceded by powder coating. In addition to the existing corrosion protection (galvanizing or aluminum), iron phosphating (sheet steel) or chrome-free passivation (aluminum) is carried out here. This makes these materials even more oxidative. The pre-treatment also serves to degrease and apply a primer to the materials to be coated. Then the powder coating (plastic coating) takes place. In addition to the coloring, this process also serves to protect against corrosion.KNOBLOCH generally uses brushed stainless steel V2A for stainless steel products, as this provides adequate protection against corrosion. The processing of stainless steel V4A is recommended if the mailbox system is installed near the chemical industry or in coastal areas, which comes into direct contact with salt water or is constantly exposed to very salty air.

Basically all Existing fonts are to be used. Our Standard fonts are Arial, Avantgarde, Tahoma and Verdana. Please ask for other fonts, your Personal account manager will be happy to advise you. Logos and symbols are to be made Available to us as Digital vector Graphics.

Arial

Avant garde

Tahoma

Verdana

Technical Design
- Laser Engraving, Engraving size max. 600 x 300 mm
- Milling engraving (removal of material with a depth of 0.25 mm), engraving size max. 600 x 400 mm
- Designed Milling Engraving (material removal is filled up with a nitro color mixture), Engraving size max. 600 x 400 mm

Laying Colors
- Nitro-based Colors as Standard

Font Engraving
- All Standard fonts (free Windows fonts) possible
- Special fonts Only as Customer Service or for a Corresponding Surcharge when Purchased from us

Particularities
- Other Layout Colors Possible on Customer Request

Technical Design
- Use of Color Foils

Font Height
- ab 10 mm

Particularities
- Shrinkage free
- Flexible and Cuddly over Beads and Rivets
- Steam Jet Cleaning Resistant
- Resistant to UV light and Weather (at least 5–7 years depending on the pigment)
- Resistant to Temperature Fluctuations (–40 ° C to + 50 ° C)
- Not for use on Textured Paints

Technical Design
- Through Engraving or through Lasering in Aluminum or Stainless Steel
- Backed with UV-resistant, white or Blue Colored Plastic Films
- Illuminated if Necessary

Font Height
- ab 20 mm

Particularities
- Other Colors of the Deposited Plastic films Possible on Customer Request

Illumination of Labeling Boxes

Labeling Boxes with through-engraving can be Illuminated on Request. Full engravings are Covered from Behind with Translucent Plexiglass.

Standard Lighting
- LED-Attics
- LED-Afford

Steles

Basic Equipment

Options

Material

Equipment

Indirect Lighting

Colors/Materials

Smooth, Silky Gloss

Smooth, matt

Feinstruktur, matt

PVD COATING

1 Casing

2 Flap

Special flaps, Optional:

Flap lock, optional:

3 Type

Captions

Arial

Avant garde

Tahoma

Verdana

Technical Design

Laying Colors

Font Engraving

Particularities

Technical Design

Font Height

Particularities

Technical Design

Font Height

Particularities

Illumination of Labeling Boxes

Standard Lighting