Fence mounted mailbox banks

Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 246 (Image No. 02528)
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 246 (Image No. 02528)
1/13
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 246; rear view (Image No. 02528)
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 246; rear view (Image No. 02528)
2/13
Fence-mounted mailbox bank with vertical box, surround RI 244 (rear), front plate and fixed with fixing frame for panel fencing (Image No. 02481)
Fence-mounted mailbox bank with vertical box, surround RI 244 (rear), front plate and fixed with fixing frame for panel fencing (Image No. 02481)
3/13
Fence-mounted mailbox bank with vertical box with surround RI 244 (rear) and front plate, fixed with fixing frame for panel fencing; rear view (Image No. 02480)
Fence-mounted mailbox bank with vertical box with surround RI 244 (rear) and front plate, fixed with fixing frame for panel fencing; rear view (Image No. 02480)
4/13
Fence-mounted mailbox bank with horizontal boxes and installation box with display, with surround RI 220 (Image No. 02524)
Fence-mounted mailbox bank with horizontal boxes and installation box with display, with surround RI 220 (Image No. 02524)
5/13
Fence-mounted mailbox bank with horizontal boxes and surround RI 240 (Image No. 02525)
Fence-mounted mailbox bank with horizontal boxes and surround RI 240 (Image No. 02525)
6/13
Fence-mounted mailbox bank with horizontal boxes and special surround (Image No. 02527)
Fence-mounted mailbox bank with horizontal boxes and special surround (Image No. 02527)
7/13
Fence-mounted mailbox bank with horizontal box and installation box with engraving, with surround RI 244 (rear) and front plate (Image No. 02531)
Fence-mounted mailbox bank with horizontal box and installation box with engraving, with surround RI 244 (rear) and front plate (Image No. 02531)
8/13
Fence-mounted mailbox bank with horizontal boxes, with surround RI 246 and roof SWING (Image No. 02540)
Fence-mounted mailbox bank with horizontal boxes, with surround RI 246 and roof SWING (Image No. 02540)
9/13
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 247 (Image No. 02552)
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 247 (Image No. 02552)
10/13
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 247; rear view (Image No. 02555)
Fence-mounted mailbox bank with horizontal boxes and installation box with engraving, with surround RI 247; rear view (Image No. 02555)
11/13
Fence-mounted mailbox bank with vertical boxes and  installation box with engraving, with surround RI 240 and roof PREVENTION 2 (Image No. 02534)
Fence-mounted mailbox bank with vertical boxes and  installation box with engraving, with surround RI 240 and roof PREVENTION 2 (Image No. 02534)
12/13
Fence-mounted mailbox bank with vertical boxes and  installation box with engraving, with surround RI 240 and roof PREVENTION 2; rear view (Image No. 02532)
Fence-mounted mailbox bank with vertical boxes and  installation box with engraving, with surround RI 240 and roof PREVENTION 2; rear view (Image No. 02532)
13/13
Fence mounted mailbox banks can be mounted uncomplicated. Moreover, they can be adjusted to the appearance of the fence and consequently, contribute to the overall concept.
Mailboxes
horizontal mailboxes(Z) | vertical mailboxes (Z)
HA: horizontal mailbox with front insertion and removal
HP: horizontal mailbox with front insertion (front panel) and rear removalHA: horizontal mailbox with front insertion and removal HA: horizontal mailbox with front insertion and removal
HP: horizontal mailbox with front insertion (front panel) and rear removalHP: horizontal mailbox with front insertion (front panel) and rear removal

Mailbox type Dimensions box         
(WHD) in mm
Dimensions
slit
(WH) in mm
Capacity in litres
EN 13724 konform

HA 2611   

HP 2611    

260 x 110 x 380

230 x 35

10        

EN 13724 konform

HA 2622

HP 2622

260 x 220 x 380

230 x 35

21

EN 13724 konform

HA 2633

HP 2633

260 x 330 x 380

230 x 35

32

EN 13724 konform

HA 2644

HP 2644

260 x 440 x 380

230 x 35

43

EN 13724 konform

HA 3011

HP 3011

300 x 110 x 380

265 x 35

12

EN 13724 konform

HA 3017

HP 3017

300 x 165 x 380

265 x 35

18

EN 13724 konform

HA 3022

HP 3022

300 x 220 x 380

265 x 35

25

EN 13724 konform

HA 3033

HP 3033

300 x 330 x 380

265 x 35

37

EN 13724 konform

HA 3044

HP 3044

300 x 440 x 380

265 x 35

50

EN 13724 konform

HA 3711

HP 3711

370 x 110 x 270

325 x 35

10

EN 13724 konform

HA 3717

HP 3717

370 x 170 x 270

325 x 35

16

EN 13724 konform

HA 3722

HP 3722

370 x 220 x 270

325 x 35

21

EN 13724 konform

HA 3733

HP 3733

370 x 330 x 270

325 x 35

32

EN 13724 konform

HA 3744

HP 3744

370 x 440 x 270

325 x 35

43

EN 13724 konform

Extra deep: also available in 380 mm depth

VA: front insertion and removal
VP: front insertion (front panel) and rear removalVA: front insertion and removal VA: front insertion and removal
VP: front insertion (front panel) and rear removalVP: front insertion (front panel) and rear removal

Mailbox type Dimensions box         
(WHD) in mm
Dimensions
slit
(WH) in mm
Capacity in litres


VA 2633   

VP 2633    

260 x 330 x 100

230 x 35

8          

EN 13724 konform

VA 2644

VP 2644

260 x 440 x 100

230 x 35

11

Extra deep: also available in 160 mm depth


         

VA 3033

VP 3033

300 x 330 x 100

265 x 35

9

EN 13724 konform

VA 3044

VP 3044

300 x 440 x 100

265 x 35

13

 

Extra deep: also available in 160 mm depth


EN 13724 konform

VA 3733

VP 3733

370 x 330 x 100

325 x 35

12

EN 13724 konform

VA 3744

VP 3744

370 x 440 x 100

325 x 35

16

EN 13724 konform

Extra deep: also available in 160 mm depth

Installation box
Intercom grille | Buttons | Nameplates | Display | Module perforation | Illumination

Intercom grille GC-120A
- Incl. adapter for mounting of commercial intercom systems
- External dimension: 95 x 55 mm (WH)

Intercom grille GC-110 (EBK) horizontal
- - Incl. adapter for mounting of commercial intercom systems
- External dimension: 90 x 45 mm (WH)

Intercom grille GC-110 (EBK) vertical
- Incl. adapter for mounting of commercial intercom systems
- External dimension: 45 x 90 mm (WH)

Intercom grille EBOX horizontal
- Incl. adapter for mounting of commercial intercom systems
- External dimension: 91 x 69 mm (WH)

Intercom grille EBOX vertical
- Incl. adapter for mounting of commercial intercom systems
- External dimension: 69 x 91 mm (WH)

 Intercom grille GC-120
- Made of aluminum, anodised, incl. adapter for mounting of commercial intercom systems
- Coloured corresponding to the mailbox bank
- External dimension: 95 x 80 mm (WH)

Aluminum button
- Bell- / light button with frame made of stable anodised aluminum profile, can be illuminated
- Antivandalism button
- External dimension: 74 x 22 mm (WH)
- Colours: silver, white, black, bronze, gold





Plastic button
- Bell- / light button made of plastic, with nameplate, can be illuminated
- External dimension: 65 x 22 mm (WH)





Stainless steel button
- External dimension: 22 mm
- Light button 22244 LED-illuminated with light pictograph, opening dimension: 16 mm
- Button 21343: opening dimension: 16 mm
- LED-button: with lighting ring in 3 colours, opening dimension: 19 mm

Nameplate MAXAV1 (flush-mount)
- Made of impact-resistant plastic
- Can be illuminated
- Vandal-proof
- External dimension (visible labelling field): 50 x 15 mm (WH)
- Suitable for stainless steel buttons

 

 

Nameplate MAXAV3A
- Stainless steel frame with included safety nameplate made of impact-resistant plastic
- Can be illuminated
- Vandal-proof
- External dimension: 100 x 22 mm (WH); labelling field: 55 x 15 mm (WH)
- Suitable for stainless steel buttons

 

 

Nameplate MAXAV3B
- Can be engraved
- Stainless steel nameplate
- External dimension (visible labelling field): 100 x 22 mm (WH)
- Suitable for stainless steel buttons


Nameplate aluminum
- Can be engraved
- For glueing
- External dimension (visible labelling field): 70 x 20 mm (WH)
- 0,5 mm thick
- Suitable for stainless steel buttons


Stainless steel nameplate for glueing
- Can be engraved
- For glueing
- External dimension (visible labelling field): 70 x 20 mm (WH)
- 0,8 mm thick
- Suitable for stainless steel buttons


Stainless steel nameplate for screw-fastening
- Can be engraved
- For screw-fastening
- External dimension (visible labelling field): 70 x 20 mm (WH)
- 2 mm thick
- Suitable for stainless steel buttons


Display small
- Flush-mounted, can be illuminated
- Dimension: 60 x 60 mm (WH)
- Milkey

Display big
- Flush-mounted, can be illuminated
- Dimension: 90 x 90 mm (WH)
- Milkey

Module perforations can be integrated in installation boxes according to clients information and after technical clarification. The work process becomes easier if the module which has to be integrated is sent to us before. This also allows a tailor-made opening.

Please contact our customer service for the exact procedure.

Standard-illumination
- Festoon with bracket


LED-illumination

- LED-festoon with bracket


LED-Illumination upon request

- Individually adjusted LED-illumination units with constant current source and twilight switch

Surrounds
RI 200 | RI 220 | RI 240 | RI 242 | RI 243 | RI 248 | RI 246 | RI 247 | RI 250 | RI 260 | RI 290

RI 200

Descricption
- Profile facing with rounded edges and trapeze corners, with lengthening of side facings also possible with stands
Materials
- 25 mm aluminium profile, powder coated or anodized
- corners made of aluminium diecast, powder coated
Remark
- surround is devided if side-/roof length is more than 2500 mm
Option
- rain deflector SC251

RI 220

Description
- Round-edged surround from profiles, sheet-metal and corners made from zamak.
Materials
- 29 mm aluminium profile, powder coated or anodized
- and 2 mm aluminium sheet, powder coated or anodized
- and corners made from zamak, powder coated
Remarks
devided surround from a stretched length of:
- 2800 mm for anodized mailbox banks
- 4000 mm for powder coated mailbox banks
Options
- rain deflector SC251
- roof Prevention 1 or Prevention 2

RI 240

Description
- Tight-fitting surround bent from one single piece, flushing with front of mailbox block
Materials
- 2 mm aluminium, powder coated or anodized
- or 1,5 mm brushed stainless steel
Remarks
maximum stretched length of:
- 2800 mm for anodized aluminium-version
- 2700 mm for powder coated aluminium- and brushed stainless steel version

RI 242

Description
- Tight-fitting surround, tripartite, flushing with mailbox front, roof sheet edged over side sheets
Materials
- 2 mm powder coated or anodized aluminium
- or 1 mm brushed stainless steel
Remarks
- surround devided if side-/roof length longer than 2500 mm
Option
- roof Prevention 1 or Prevention 2 or Prevention 3

RI 243

Can only be used for mailbox depth 160 mm or more
Description
- Tripartite arched surround, stands are surrounded in the area of the box block
Materials
- 1,5 mm powder coated or anodized aluminium
- or 1,5 mm brushed stainless steel
Remarks
- maximum side-/roof length: 1150 mm

RI 248

Description
-tight fitting surround, tripartite, with rails below the roof and rain protection to the front and back
Materials
2 mm powder coated or anodized aluminum or 1,5 mm brushed stainless steel
Remarks
integrated rain protection on front and back
separated if side-/roof length is longer than 2.500 mm

RI 246

Can only be used for mailboxes with rear removal
Description
- Tight-fitting surround bent from one piece, with integrated, overlapping at front and back, rounded rain edge
Materials
- 2 mm powder coated or anodized aluminium
- or 1,5 mm brushed stainless steel
Remarks
Maximum stretched length:
- 2800 mm with anodised aluminium version
- 2700 mm with powder coated aluminium- and brushed stainless steel version

RI 247

Only for mailbox banks with rear removal
Description
- Tight-fitting, tripartite surround, with integrated, to back and front overlapping rain edge. Roof sheet edged over side sheets
Materials
- 2 mm powder coated or anodized aluminium
- or 1 mm brushed stainless steel
Remarks
- surround devided from roof-/side length of 2500 mm
Option
- roof Prevention 1, Prevention 2 or Prevention 3

RI 250

Only for mailbox banks with depth of 160 mm or more
Description
- 45 mm compact surround made of edged sheet steel, in extension of side facing also surround for columns
Materials
- 2 mm powder coated aluminium
- or 1,5 mm brushed stainless steel
Remarks
- maximum side length of 2000 mm

RI 260

Description
- Panelling with curved roof construction made from profile and tight-fitting side sheets, roof construction overlapping and front and rear builds a rain protection
Materials
- 25 mm powder coated aluminium profile
- and 2 mm powder coated aluminium
Remarks
- surround divided if more than 1150 mm side length and/or more than 2500 mm side length

RI 290

Description
- large round-edged surround made of profiles, metal sheets and corners of zamak
Materials
- 57 mm aluminium profile, powder coated or anodized
- and 2 mm powder coated or anodized aluminium
- and zamak corners, powder coated
Remarks
surround devided from stretched length of
- 2800 mm with anodised mailbox banks
- 4000 mm with powder coated mailbox banks
Options
- rain deflector SC251
Roofs
Roof "Prevention 2" | Roof "Prevention 1" | Roof "Prevention 3"

Roof "Prevention 2"

Roof construction made from 1,5 mm powder coated  or anodized aluminium or 1 mm or 1,5 mm brushed stainless steel. Depth, width and height adapted to mailbox bank - 35° roof pitch; threepartite with visible rivets - when used with surround RI244 front overlapping with integrated rain edge - when used with surround RI242 flushing with front - when used with surround RI220 put behind the profiles on the top surround
Can be used with surrounds RI242,RI244, RI247, RI220 and with stands SO300 / 310 / 315 / 320, SO401, SO440-2, SO441, SO460, SO491 Roof devided from 2000 mm width

Roof "Prevention 1"


Roof construction made of 2 mm powder coated aluminium or 1 mm stainless steel.

Depth, width and height is adjusted to the mailbox bank; ascent 30°; closed on sides, opened on back, adjusted to tight fitting or round facing, suitable for surface mounted mailbox banks.

Roof "Prevention 3"


Description
attached triangle roof, straight finishing at rear, 25 mm visible edge from front, roof inclination 15°, one-piece, without visible rivets on front, when using facing RI244, on front with integrated rain protection, when using facing RI242 flushing with front

Materials
1,5 mm aluminium, powder coated or anodised,
or 1 mm or. 1,5 mm stainless steel, brushed

Remarks
possible with facings RI242, RI244,
separated roof from 2.000 mm width

Surfaces, materials and colours
Powder coating in 21 RAL standard colours | Anodizing and PVD colours | Materials
smooth, silk-glosssmooth, matmicrostructure, mat
RAL 7016
Anthracite grey
RAL 7016
Anthracite grey
RAL 7016
Anthracite grey
RAL 9006
White aluminium
RAL 9006
White aluminium
RAL 9006
White aluminium
RAL 9007
Grey aluminium
RAL 9007
Grey aluminium
RAL 9007
Grey aluminium
RAL 9016
Traffic white
RAL 9016
Traffic white
RAL 9016
Traffic white
RAL 7035
Light grey
DB703
Iron mica
DB703
Iron mica
RAL 8017
Chocolate brown
RAL 8028
Terra brown
RAL 6005
Moss green
RAL 9005
Deep black
RAL 9010
Pure white
After pretreatment the parts are powder coated manually by KNOBLOCH. Here electrostatically charged polyester powder is applied to the raw parts to a thickness of 70-100 micrometers with a hand spray gun and then baked at 160-200 ° Celsius. It results in a continuous, weather-resistant, thermally stable surface.

No use of harmful solvents, the possibility of reclaiming and recycling the powder, efficiencies up to 99% and short color change times in conjunction with high-precision control technology make this surface treatment the most economic and most environmentally friendly technology in the entire surface technology.

KNOBLOCH uses polyester powder coatings in quality satin finish with a gloss of 75 ° + / -10 °. By default, colours from the RAL range are used. Colors of other standards such as British Standard (BS) or Natural Color System (NCS) or effect colors such as structure paints, pearl-effect, etc. can, usually at an additional cost, also easily be painted.

To achieve exact color match to the existing components on site, the on site existing colour has to be used since already different batches of the same suppliers can vary. Here, the customer usually sends us the coloured powder or KNOBLOCH provides a color sample for on-site comparison.

Anodizing colours


C0/EV1 Silver/Nature
Standard colour
C31
Stainless steel colour
C32
Light bronze
C33
Medium bronze
C34
Dark bronze
C35
Black
EV2
Nickel silver colour
EV3
Brass colour
Anodized surfaces provide protection against mechanical impact and are weather and corrosion resistant. The metallic shine of the material is maintained, since the oxide layer is transparent. Especially mailboxes and here specially door side panel mailbox banks are often used with anodized surfaces to make them visually matching to the anodized facades and entrances. In order to maintain uniformity of color to the existing parts, the EURAS standard is used for defining. For exact color match, the customer must provide a sample. Basically all desired colors can be achieved. PVD The PVD process is a special procedure when a brass-colored finish is desired in the mailboxes and bell plates. Here polished stainless steel parts are vaporized in a vacuum chamber. Since original brass parts weather quickly and are very sensitive to vandalism with a paint protection film, a PVD coating is a good alternative as it creates a very hard, resistant surface. Apart from that, with this method many shades from gold over brass, bronze, copper, silver, grey, anthracite up to black or matt black can be created. The process is very complicated and therefore very cost-intensive. But in terms of quality it convinces and is therefore offered by KNOBLOCH when brass-colored products are requested.

Next to stainless steels, aluminum and zinced galvanized (electrolytic) steel sheet with low zinc spangle are used for production. Aluminum and steel sheet are always powder coated, aluminium can also be anodized.

The powder coating is always preceded by a pre-treatment. Here, the existing corrosion protection (galvanizing or aluminum) is additionally followed by an iron phosphate (steel) or chromium-free passivation (aluminum). Thus, these materials are still oxidation carrier. Also the treatment serves for degreasing and application of a tie coat to the materials that have to be powder coated. Thereafter, the powder coating (plastic coating) takes place. Besides the colouring this process is also used to prevent corrosion.

Max KNOBLOCH usually uses brushed stainless steel V2A for stainless steel products, as this provides adequate corrosion protection. The processing of stainless steel V4A is recommended if the mailbox bank is mounted near the chemical industry or in coastal areas, which directly comes in contact with salt water or is constantly exposed to very salty air.
Inscriptions

Fonts, symbols and logos


Generally all existing fonts can be used. Our standard fonts are Arial, Avantgarde, Tahoma and Verdana. Please ask your personal account manager for other fonts. He will be happy to help you. Logos and Symbols have to be provided to us as digital vector grafics.

Arial

Avantgarde

Tahoma

Verdana


Inscription by engraving

Technique
For engravings the surface of the metal is milled up, the formed deepening is filled with black special colour.


Font height

from 10 mm

Specifics
other colours for the highlighting engravings are possible on request.


Inscription by through-graving

Technique
Through-graving or through-lasering in aluminium or stainless steel. Highlighted with UV-resistant, white or blue coloured plastic foils. Illumination possible.

Font height
from 20 mm

Specifics
other colours for the highlighting foils are possible on request.



Inscription by foil lettering

Technique
Coloured foil Scotchal, series 100

Font height
from 10 mm

Specifics
does not shrink, flexible and tight fitting over crimps and rivets, can be steam cleaned, resistant against UV-light and weather (approx. 5–7 years depending on pigment), resistant against temperature variations (–40 °C to +95 °C)


Illumination of inscription boxes

Inscription boxes with through-graving can be illuminated on request. For this through-gravings are covered from the back with translucent Plexiglas.

Standard illumination

Cased fluorescent tube, (lenght depending on inscription 300 - 1250 mm). Use of several fluorescent tubes depending on inscription (220 V / 80 W)

LED illumination on request

Individually adapted LED illumination units with separately installed constant current source and with integrated dimmer switch.


Mounting aids
  • General information

  • Banks with front removal

  • Banks with rear removal

download
SERVICE-HOTLINE: +49 (0) 34 31–60 64 -200 | info@max-knobloch.com