Paper feeders

BOX1
BOX1
1/4
BOX1
BOX1
2/4
BOX2
BOX2
3/4
BOX2 (Image No.: 01559)
BOX2 (Image No.: 01559)
4/4
Do you know that? The tenants get their post out of the mailbox, sort it immediately and the unloved advertising leaflets lay on top of the mailbox bank or even directely inside the entrance area… That does not only look unattractive but does not meet the fire protection regulations for residential buildings. We thought about this problem and can offer to our clients already since 2007 an elegant and practical solution – the KNOBLOCH paper boxes. There are 2 different variations: „BOX 1“ and „BOX 1 deep“  have insertion and removal of the paper from the opening above. „Box 2“ is open on top as well but removal is made clever from the pivoted front which can be opened with a key. All our paper boxes are made of 1,5 mm zinced steel and are powder coated as requested by the client or matching to the mailbox bank. The mounting is made uncomplicated by wall-mounting. We are convinced: With a BOX from KNOBLOCH every entrance area stays tidy and attractive.
Paper feeders
Paper boxBOX1-170BOX1-200BOX2
Dimensions:500 x 450 x 170 mm (WHD)500 x 450 x 200 mm (WHD)300x 400 x 140 mm (WHD)
Capacity:38 litres45 litres16 litres
Material:1,5 mm steel sheet1,5 mm steel sheet1,5 mm steel sheet
Front can be swivelled
for bottom disposal
Surfaces, materials and colours
smooth, silk-glosssmooth, matmicrostructure, mat
RAL 7016
Anthracite grey
RAL 7016
Anthracite grey
RAL 7016
Anthracite grey
RAL 9006
White aluminium
RAL 9006
White aluminium
RAL 9006
White aluminium
RAL 9007
Grey aluminium
RAL 9007
Grey aluminium
RAL 9007
Grey aluminium
RAL 9016
Traffic white
RAL 9016
Traffic white
RAL 9016
Traffic white
RAL 7035
Light grey
DB703
Iron mica
DB703
Iron mica
RAL 8017
Chocolate brown
RAL 8028
Terra brown
RAL 6005
Moss green
RAL 9005
Deep black
RAL 9010
Pure white
After pretreatment the parts are powder coated manually by KNOBLOCH. Here electrostatically charged polyester powder is applied to the raw parts to a thickness of 70-100 micrometers with a hand spray gun and then baked at 160-200 ° Celsius. It results in a continuous, weather-resistant, thermally stable surface.

No use of harmful solvents, the possibility of reclaiming and recycling the powder, efficiencies up to 99% and short color change times in conjunction with high-precision control technology make this surface treatment the most economic and most environmentally friendly technology in the entire surface technology.

KNOBLOCH uses polyester powder coatings in quality satin finish with a gloss of 75 ° + / -10 °. By default, colours from the RAL range are used. Colors of other standards such as British Standard (BS) or Natural Color System (NCS) or effect colors such as structure paints, pearl-effect, etc. can, usually at an additional cost, also easily be painted.

To achieve exact color match to the existing components on site, the on site existing colour has to be used since already different batches of the same suppliers can vary. Here, the customer usually sends us the coloured powder or KNOBLOCH provides a color sample for on-site comparison.
SERVICE-HOTLINE: +49 (0) 34 31–60 64 -200 | info@max-knobloch.com