Steles

Stele with 2 mailboxes, installation box and 2 acrylic signs (mounted with spacers) (Image No.: 01676)
Stele with 2 mailboxes, installation box and 2 acrylic signs (mounted with spacers) (Image No.: 01676)

1/8
Stele with mailbox, installation box (intercom grille, camera module, 4 bell elements with nameplates) and engraving of the street name (Image No.: 01708)
Stele with mailbox, installation box (intercom grille, camera module, 4 bell elements with nameplates) and engraving of the street name (Image No.: 01708)
2/8
Stele with display box, mailbox, installation box and engraving of the house number (Image No.: 01603)
Stele with display box, mailbox, installation box and engraving of the house number (Image No.: 01603)
3/8
Stele with mailbox, installation box and engraving of the house number (Image No.: 01614)
Stele with mailbox, installation box and engraving of the house number (Image No.: 01614)
4/8
Stele with mailbox and installation box with engraving and braille (Image No.: 01636)
Stele with mailbox and installation box with engraving and braille (Image No.: 01636)
5/8
installation box with braille (Image No.: 01637)
installation box with braille (Image No.: 01637)
6/8
Stele with two mailboxes and inscription box with engraving (Image No.: 01641)
Stele with two mailboxes and inscription box with engraving (Image No.: 01641)
7/8
sketch - Stele
sketch - Stele
8/8
Functionality and design must not be mutually exclusive. With our shapely steles and communication columns we combine design with highest functionality. The design and equipment can be adjusted to structural conditions, requirements of the principle and ideas of the architect. Consequently, communication elements of nearly every type can be integrated, bell- and light buttons, nameplates, illuminated displays, intercom- and camera modules etc. Moreover, our steles offer the possibility to include readable braille for blind persons or to arrange mailboxes and communication elements accessible for handicapped persons.
Basic equipment
Maximum overall dimension
  • height 2.000 mm, width+ 2 x depth maximum 1.000 mm
Material
  • external shell1,5 mm stainless steel, brushed
Mailbox
  • mailbox with front or rear removal
  • door equipped with high-quality pin-tumbler cylinder lock
  • damped, silently closing insertion flap, flushing with front, opening iinwards
Mounting
  • for screw fasting or concrete casting
Options
Material
  • external shell 1,5 mm stainless steel, powder coated
Equipment
  • bell and light button as per requirement of client
  • other function elements like video camera, preparation for intercom systems, key-operated push buttons etc. as per requirement of the client
  • direct inscriptions of integrated inscription or function elements with engraving, illuminated through-graving or foil letters
  • indirect inscription with illuminable display and / or additional signs
Indirect illumination
  • prewired LED-light strip in 15 x 15 mm profile incl. constant current source with dimmer switch for indirect illumination
Surfaces, materials and colours
smooth, silk-glosssmooth, matmicrostructure, mat
RAL 7016
Anthracite grey
RAL 7016
Anthracite grey
RAL 7016
Anthracite grey
RAL 9006
White aluminium
RAL 9006
White aluminium
RAL 9006
White aluminium
RAL 9007
Grey aluminium
RAL 9007
Grey aluminium
RAL 9007
Grey aluminium
RAL 9016
Traffic white
RAL 9016
Traffic white
RAL 9016
Traffic white
RAL 7035
Light grey
DB703
Iron mica
DB703
Iron mica
RAL 8017
Chocolate brown
RAL 8028
Terra brown
RAL 6005
Moss green
RAL 9005
Deep black
RAL 9010
Pure white
After pretreatment the parts are powder coated manually by KNOBLOCH. Here electrostatically charged polyester powder is applied to the raw parts to a thickness of 70-100 micrometers with a hand spray gun and then baked at 160-200 ° Celsius. It results in a continuous, weather-resistant, thermally stable surface.

No use of harmful solvents, the possibility of reclaiming and recycling the powder, efficiencies up to 99% and short color change times in conjunction with high-precision control technology make this surface treatment the most economic and most environmentally friendly technology in the entire surface technology.

KNOBLOCH uses polyester powder coatings in quality satin finish with a gloss of 75 ° + / -10 °. By default, colours from the RAL range are used. Colors of other standards such as British Standard (BS) or Natural Color System (NCS) or effect colors such as structure paints, pearl-effect, etc. can, usually at an additional cost, also easily be painted.

To achieve exact color match to the existing components on site, the on site existing colour has to be used since already different batches of the same suppliers can vary. Here, the customer usually sends us the coloured powder or KNOBLOCH provides a color sample for on-site comparison.
Inscriptions

Fonts, symbols and logos


Generally all existing fonts can be used. Our standard fonts are Arial, Avantgarde, Tahoma and Verdana. Please ask your personal account manager for other fonts. He will be happy to help you. Logos and Symbols have to be provided to us as digital vector grafics.

Arial

Avantgarde

Tahoma

Verdana


Inscription by engraving

Technique
For engravings the surface of the metal is milled up, the formed deepening is filled with black special colour.


Font height

from 10 mm

Specifics
other colours for the highlighting engravings are possible on request.


Inscription by through-graving

Technique
Through-graving or through-lasering in aluminium or stainless steel. Highlighted with UV-resistant, white or blue coloured plastic foils. Illumination possible.

Font height
from 20 mm

Specifics
other colours for the highlighting foils are possible on request.



Inscription by foil lettering

Technique
Coloured foil Scotchal, series 100

Font height
from 10 mm

Specifics
does not shrink, flexible and tight fitting over crimps and rivets, can be steam cleaned, resistant against UV-light and weather (approx. 5–7 years depending on pigment), resistant against temperature variations (–40 °C to +95 °C)


Illumination of inscription boxes

Inscription boxes with through-graving can be illuminated on request. For this through-gravings are covered from the back with translucent Plexiglas.

Standard illumination

Cased fluorescent tube, (lenght depending on inscription 300 - 1250 mm). Use of several fluorescent tubes depending on inscription (220 V / 80 W)

LED illumination on request

Individually adapted LED illumination units with separately installed constant current source and with integrated dimmer switch.


SERVICE-HOTLINE: +49 (0) 34 31–60 64 -200 | info@max-knobloch.com