General information
Please check delivery before you start mounting. Everything has to be complete and in a faultless condition. We are not liable for damages resulting from mounting.
Accessories
Included Accessories
4 x flat bar
4 x M4 screw
4 x washer
4 x spacer sleeve
4 x nut
Important! The mounting material is suitable for fences up to 10 mm thickness. If the fence is thicker than 10 mm, please use longer M4 screws. How to calculate the required screw length: Required screw length = fence thickness + 30 mm
Tools required for mounting
- wrench size 7
- Phillips screwdriver, with a reversible ratchet if needed
Mounting
We recommend that two people carry out the assembly.
From the inside out, insert the screws (2) with washers (3) through the mounting holes in the back of your product. From the outside, place one spacer sleeve (4) on each screw. Place two flat bars (1) horizontally and parallel to each other onto the screws and spacer sleeves.
From the other side of the fence, slide the remaining two flat bars into place. Place the nuts (5) on top and tighten them with a wrench while holding the screw in place from the inside with a Phillips screwdriver.
Note: When installing newspaper holders, you may need a reversible ratchet to hold the screw in place from the inside.
Article No.: M0076-001, Last updated: October 2026