Door Mailboxes & Interior Door Mailboxes

Model Series 229

oben: ALEK229 V; unten: ALEK229 S

Attachment:Covered
Dimensions Aperture: 310x 105 mm
Dimensions Slot: 230 x 35 mm

Version in 2 mm Aluminum Powder-coated with ALEK229 V flap made of Aluminum Profile, powder-coated

Variant: type of fastening: Visible ALEK229 S

Completely made of Stainless Steel, brushed DEK229 V

Variant: Mounting type : Visible DEK229 S

Modell-Reihe 265

Attachment: Covered
Dimensions Aperture: 345 x 105 mm
Dimensions Slot: 265 x 35 mm

Version in 2 mm Aluminum powder-coated with ALEK265 V flap made of Aluminum Profile, powder-coated

Variant: Mounting type: Visible ALEK265 S

Completely in Stainless Steel, Brushed DEK325 V

Variant: Mounting type: Visible DEK265 S

Model Series 325

Attachment: Covered
Dimensions Aperture: 405 x 105 mm
Dimensions Slot: 325 x 35 mm

Version in 2 mm aluminum powder-coated with ALEK325 V flap made of Aluminum Profile, powder-coated

Variant: Mounting type: Visible ALEK325 S
Completely in Stainless Steel, Brushed DEK325 V
Variant: Mounting type: visible DEK325 S

Flap (Item number)	Aperture Dimensions (BH) in mm	Color Flap	Color Frame
BE8017-310 / BE8017-400	310 / 400 x 80	RAL 8017, Chocolate Brown	Black
BE3003-310 / BE3003-400	310 / 400 x 80	RAL 3003, rubinrot	weiß
BE9001-310 / BE9001-400	310 / 400 x 80	RAL 9001, cremeweiß	weiß
BE9005-310 / BE9005-400	310 / 400 x 80	RAL 9005, tiefschwarz	schwarz
BE9010-310 (T601E0000) / BE9010-400 (T602E0000)	310 / 400 x 80	RAL 9010, reinweiß	weiß
BE9016-310 (T601G0000) / BE9016-400 (T602G0000)	310 / 400 x 80	RAL 9016, verkehrsweiß	weiß
BEC 0_EV 1-310 (T60110000) / BEC 0_EV 1-400 (T60210000)	310 / 400 x 80	C0/EV 1, natur	schwarz
BEC 34-310 (T60130000) / BEC 34-400 (T60230000)	310 / 400 x 80	C34, dunkelbronze	schwarz
BEELO X“VA “-310 (T60184000) / BEELO X“VA “-400 (T60284000)	310 / 400 x 80	eloxiert, Edelstahloptik	schwarz

Lining Frame (Item Number)	Door Leaf Thickness in mm	Flap (Width) in mm	Color Lining Frame
BEF 27-310WE?/ BEF 27-400WE	17–48	310 / 400	weiß
BEF 27-310SCHW / BEF 27-400SCHW	17–48	310 / 400	schwarz
BEF 14-310WE?/ BEF 14-400WE	30–61	310 / 400	White
BEF 14-310SCHW / BEF 14-400SCHW	30–61	310 / 400	schwarz
No Lining frame Required	44–75	-	-

Insulating Letter Flap with 2 Aluminum half-shells on Plastic Bearings

Form a Self-closing Roller that Maintains the thermal Insulation of the Door,
Protect against Drafts and Dirt,
and create a heat-insulating air cushion in the throw-through slot.

Cold Bridges are Prevented by the use of Plastic.

A Silicone Sealing cord prevents drafts and offers additional acoustic Protection.

Interior Door Mailbox	Dimensions (BHT) in mm	Suitable for the Following flap Models
IVA 2633T	260 x 330 x 160	Door Flaps, 309 mm Wide
IVA 3033T	300 x 330 x 160	Door Flaps, 345 mm Wide
IVA 3733T	370 x 330 x 160	Door Flaps, 405 mm Wide
IVA 3744T	370 x 440 x 160	Door flaps, 405 mm Wide
IVP 3744	370 x 440 x 200	Insulated Letter Boxes, 310 mm Wide
IVP 4544	450 x 440 x 200	Thermal Insulating Letter Boxes, 400 mm Wide

Use indoors and Outdoors

Note: When Installing Outdoors, both the Mailbox and the door flap must be Sealed Separately - this is the only way to Protect the mail from moisture!

Concealed Fastening without visible Mounting Holes

It is Fixed to the inside of the door or gate using Fastening holes on the rear wall of the Letter Box

Mounting holes can also be omitted if desired

Mail Basket for Collecting Mail, for Fastening to doors (from the inside) under Letter Boxes.

For Interior use Only.

Material/Color:
Wire mesh, Powder-coated in RAL 9016 traffic White, smooth, Satin Finish

Mail Basket	Dimensions (WHD) in mm	Suitable for the following Flap Models
IVX3033T	300 x 330 x 160	Door Flaps, 345 mm wide Insulated Letter Boxes, 310 wide

Throw-in necks bridge Distances of 25 to 200 mm between the throw-in and the Mailbox in doors and walls. Throw-in necks are always made of brushed stainless steel and are available in 3 sizes, each matching the ALEK / DEK door flaps.

Set	Interior Door Mailbox	Door Opening Flap Dimensions (BH) in mm	Throw-in neck size External Dimensions (BH) in mm
SET 1	IVA2633T	ALEK/DEK 229; 309 x 105	Gr. 1; 251 x 58,5
SET 2	IVA3033T	ALEK/DEK 265; 345 x 105	Gr. 2; 287 x 58,5
SET 3	IVA3733T	ALEK/DEK 325; 405 x 105	Gr. 3; 347 x 58,5
SET 4	IVA3744T	ALEK/DEK 325; 405 x 105	Gr. 3; 347 x 58,5

Hints
Required Door Opening

Results from the External Dimensions of the neck + 2 mm
Attention: Due to the different door Thicknesses, assembly material is not part of the Package
des Lieferumfangs

When the Panels are Hidden

Minimum Door Thickness of 8.5 mm (parts of the set are not Interconnected; Depth
The Neck is Variable, d. H. adjusted to the door thickness (Customer Information Required))

We offer you powder coating free of charge in 21 standard RAL colors. Alternatively, We can paint all colors from the RAL Classic range for an Additional Charge.

Smooth, Silky Gloss

Smooth, Matt

Fine Structure, matt

RAL 7016 Anthracite Grey

RAL 9006 Weißaluminium

RAL 9007 Grey Aluminium

RAL 9007 Gray Aluminum

RAL 9016 Traffic White

DB703 Iron Glimmer

RAL 7035 Light Gray

RAL 8028 Terra Brown

RAL 8017 Chocolate Brown

RAL 6005 Moss Green

RAL 9005 Deep Black

RAL 9010 Pure White

With powder coating, the parts are manually painted after the pretreatment at KNOBLOCH. Here, electrostatically charged polyester powder is applied to the raw parts in a thickness of 70–100 micrometers using a hand spray gun and then baked at 160–200 ° Celsius. A continuous, weatherproof, thermostable surface is created.

No use of harmful solvents, the possibility of recovery and recycling of the powder, efficiencies up to over 99% and short color change times in connection with high-precision control Technology make this Surface treatment the most Economical and Environmentally friendly of the entire Surface Technology.

At KNOBLOCH, Polyester powder coatings are used in the quality of silk gloss with a gloss level of 75 ° +/- 10 °. Colors from the RAL range are used as standard. Colors of other standards such as British Standard (BS) or Natural Color System (NCS) or effect Xolors such as Textured paints, pearl effect Colors and the like. Can also be Painted easily, usually for an Additional Xharge.

In order to Achieve Absolute Color Uniformity with the Components available on site, the color available on Site must be Used, Since there may be Deviations even with different batches from the same supplier. Here the Customer usually the Color powder or provides KNOBLOCH with a Color Sample for on-site Comparison.

C0 / EV1 Silver/Natural (Standard Color)

C31 Stainless Steel Colored

C32 Light Bronze

C33 Middle Bronze

C34 Dark Bronze

C35 Black

EV2 Nickel Silver

EV3 Brass-Colored

Anodized Surfaces offer Protection against Mechanical influences and are Weather and Corrosion Resistant. The Metallic luster of the material is retained because the oxide layer is transparent. In Particular, Mailbox Systems, and here in Particular door side Systems, are often used with anodized Surfaces in order to make them Visually Suitable for anodized facades and Anodized Entrance Systems.

The EURAS Standard is used to define the Same Color of parts on site. For absolute Color Consistency, the Customer must Provide a sample. In Principle, all Desired colors can be achieved.

PVD COATING

The PVD Coating is a Special Process when a brass-colored Surface is desired in the area of the Mailboxes and Bell Panels. Polished Stainless Steel Parts are Steamed in a vacuum chamber. Since Original brass parts weather quickly and are very Sensitive to vandalism with a paint Protection Layer, a PVD Coating is an alternative, as it Creates a very hard, Resistant Surface.

Otherwise, this Process can be used to create many Color shades from gold to Brass, Bronze, Copper, Silver, Gray, Anthracite to black or matt black. The Process is very Complex and therefore also very cost-intensive. However, it is Convincing in terms of Quality and is therefore offered by KNOBLOCH when Inquiring about brass-colored articles.

1 Housing

Standard:0.63 mm Galvanized Sheet Steel, Powder Coated
Option: Stainless Steel, Brushed, 1.4301 (V2A) or 1.4404 (V4A)

2 Flap

Standard: 2 mm Extruded Aluminum Profile, Powder-Coated

Option: 1 mm Stainless Steel, Brushed or 2 mm Extruded Aluminum Profile, Anodized

Possible Slot Sizes: 230 x 35 mm; 265 x 35 mm; 325 x 35 mm

Special Flaps, Optional:

- Large Flaps: 63 mm High, Allows Insertion of thick mail, Reduced
- Intervention Protection, Possible in Mailboxes from a Height of 220 mm (HP only) or 330 mm
- Inward Opening Flaps
- No Flaps

Flap Lock, Optional:

- Not Visible from the Outside
- Mounted behind the Flap using a Self-adhesive Carrier Plate
- Resists Forces up to 62 N / cm²
- Retrofitting Possible

3 Door

Standard: 1.2 mm Galvanized Sheet Steel, Powder-Coated
Option: - 1.2 mm Stainless Steel, Brushed, 1.4301 (V2A) or 1.4404 (V4A) - 1.2 mm Aluminum, Powder-Coated or Anodized
Hinges: Stainless Steel with Pressed Brass pin, Rustproof

In Addition to Stainless Steels, Aluminum and Galvanized Steel Sheet with a small Zinc Flower are Processed. Aluminum and Sheet Steel are always Powder-coated or Anodized for aluminum. Pre-treatment is always Preceded by Powder Coating. In Addition to the existing Corrosion Protection (galvanizing or aluminum), iron phosphating (sheet steel) or chrome-free passivation (aluminum) takes place here. This makes these materials even more oxidative. The pre-treatment also serves to degrease and apply a primer to the materials to be coated. Then the powder coating (plastic coating) takes place. In addition to the coloring, this process also serves to protect against corrosion.KNOBLOCH generally uses brushed stainless steel V2A for stainless steel products, as this provides adequate protection against corrosion. The Processing of V4A Stainless Steel is recommended if the Mailbox System is installed near the Chemical Industry or in coastal areas that come into direct Contact with Salt water or is Constantly Exposed to very Aalty Air.

Basically all Existing fonts are to be used. Our Standard fonts are Arial, Avantgarde, Tahoma and Verdana. Please ask for other fonts, your Personal account manager will be happy to advise you. Logos and symbols are to be made Available to us as Digital vector Graphics.

Arial

Avant garde

Tahoma

Verdana

Technical Design
- Laser Engraving, Engraving size max. 600 x 300 mm
- Milling engraving (removal of material with a depth of 0.25 mm), engraving size max. 600 x 400 mm
- Designed Milling Engraving (material removal is filled up with a nitro color mixture), Engraving size max. 600 x 400 mm

Laying Colors
- Nitro-based Colors as Standard

Font Engraving
- All Standard fonts (free Windows fonts) possible
- Special fonts Only as Customer Service or for a Corresponding Surcharge when Purchased from us

Particularities
- Other Layout Colors Possible on Customer Request

Technical Design
- Use of Color Foils

Font Height
- ab 10 mm

Particularities
- Shrinkage free
- Flexible and Cuddly over Beads and Rivets
- Steam Jet Cleaning Resistant
- Resistant to UV light and Weather (at least 5–7 years depending on the pigment)
- Resistant to Temperature Fluctuations (–40 ° C to + 50 ° C)
- Not for use on Textured Paints

Technical Design
- Through Engraving or through Lasering in Aluminum or Stainless Steel
- Backed with UV-resistant, white or Blue Colored Plastic Films
- Illuminated if Necessary

Font Height
- ab 20 mm

Particularities
- Other Colors of the Deposited Plastic films Possible on Customer Request

Illumination of Labeling Boxes

Labeling Boxes with through-engraving can be Illuminated on Request. Full engravings are Covered from Behind with Translucent Plexiglass.

Standard Lighting
- LED-Attics
- LED-Afford

Door Mailboxes & Interior Door Mailboxes

Door Flaps

Model Series 229

Modell-Reihe 265

Model Series 325

Insulating Letter Boxes

Interior Door Mail Boxes

Use indoors and Outdoors

Concealed Fastening without visible Mounting Holes

Mail Basket

Mail Basket for Collecting Mail, for Fastening to doors (from the inside) under Letter Boxes.

Material/Color:

Throw-in Kits

Hints

Colors/Materials

Smooth, Silky Gloss

Smooth, Matt

Fine Structure, matt

PVD COATING

1 Housing

2 Flap

Special Flaps, Optional:

Flap Lock, Optional:

3 Door

Captions

Arial

Avant garde

Tahoma

Verdana

Technical Design

Laying Colors

Font Engraving

Particularities

Technical Design

Font Height

Particularities

Technical Design

Font Height

Particularities

Illumination of Labeling Boxes

Standard Lighting